SINQ Wiki: DIL2

DIL2

Your trail: SEAwiki | DIL2 | ILL4 | ShowMenuBreadcrumbs | DIL5

SINQ

LIN

SINQ Wiki
- Main Page
- Search SINQ Wiki
- Sample Environment
- Probenumg. Intern
- Troubleshooting SICS

This Page
- Page Info
- Printer Friendly

Referenced by
RemoveMixtureDIL
DilSampleMounting
DilutionCryostats
EarlierProgress

Wiki Info
- Unused pages
- Undefined pages
- RecentChanges
- Page Index
- System Info
- JSPWiki Docu
- SandBox
- OneMinuteWiki
- Create a New Page

JSPWiki v2.0.52

This is version 5. It is not the current version, and thus it cannot be edited.
[Back to current version] [Restore this version]

Oxford Instruments Kelvinox Dilution Insert DIL2

DIL2 was aquired in 2006, mainly financed by the "SNF Förderungsprofessur Michel Kenzelmann". It is equipped with a weak link, allowing access to the range 1...2 K without removing the mixture.

Problems with DIL2

The weak link is too weak. For the first experiments we will use a simple copper sample holder, and use the sensor on the mixing chamber.

DIL2 Sample mounting

used in	MA15	MA11	MA02	MA09
sample space diameter [mm]	17.3	17.3	23.6	45
max. sample diameter [mm]	12	12	18	35
distance from thread to beam center [mm] adjustable by about +- 10 mm	40	51	97	194
allowed size below beam center [mm]	64	30	60	24

On the mixing chamber, there is a bolt with an M5 thread (on the sample container a 7 mm deep hole with an M5 thread is needed).

Sensor Calibration

The calibration curve in the FemtoPower system from Oxford Instruments is generic. For more precise values use the table below.

Mix.Ch.	Display	Sample
0.043	0.040	0.036
0.063	0.060	0.055
0.084	0.080	0.075
0.104	0.100	0.094
0.155	0.150	0.143
0.205	0.200	0.191
0.306	0.300	0.289
0.407	0.400	0.387
0.609	0.600	0.581
0.811	0.800	0.777
1.013	1.000	0.972
1.521	1.500	1.461
2.029	2.000	1.951
3.050	3.000	2.938
4.075	4.000	3.929
5.105	5.000	4.925

Attachments: dil2Open.jpg GasHandling.jpg dil2.jpg

This particular version was published on 17-Aug-2006 08:34:36 UTC by MarkusZolliker.