6.8 Tesla Horizontal Field Cryomagnet MA7

The horizontal high field cryomagnet has a restricted neutron access. There are 4 windows of 45 deg each, valid for a sample of 15 mm diameter. For larger samples, the opening angle for full access is sligthly smaller. In the field direction, the vertical access is +- 22.5, in fact, the access is a cone. Perpendicular to the field direction, the acces is +-6.7 deg on a 15 mm sample.

For access with polarized neutrons, an asymmetric mode (max. 6.2 Tesla) is available. This is needed when a beam perpendicular to the field is used.

This cryomagnet has strong stray fields due to the size of its coils. Before it may be used on any instrument, force tests have to be done. The specifications allow forces up to 1000 N vertically and 500 N horizontally.

MA7 Specifications

More information on intranet page (drawing): LdmWiki:MA7

MA7 Restrictions

Asymetric mode

For changing for symmetric mode to asymmetric and vice versa:

• change a cable on the top of the magnet under the aluminium cyclinder
• change the configuration of the IPS:
• press RAISE+LOWER+LOC/REM simultanously ("tESt" and "t 00" appears)
• press LOWER to go to "t 07", and then LOC/REM (""SUP" and "S 00" appears)
• press LOWER 5 times to go to "S 11" and then press LOC/REM (the induction value appears)
• press and hold LOC/REM and change the value with RAISE or LOWER, release LOC/REM when done
• press RAISE 7 times to go to "S 02" and then press LOC/REM (the value for max. current appears)
• press and hold LOC/REM and change the value with RAISE or LOWER, release LOC/REM when done
• press LOWER once to go to "S 01" and then press LOC/REM (the value for max. current appears)
• press LOC/REM again (the value for max. field appears)
• press and hold LOC/REM and change the value with RAISE or LOWER, release LOC/REM when done
• press LOWER once to go to "S 00" and then press LOC/REM ("tESt" and "t 00" appears)
• press LOC/REM again ("Stor.y" appears) and again