| Removed lines 5-8 |
| - max. Forces on Magnet: |
| - |horizontal |500N |
| - |vertical |500N |
| - |
| Line 16 was replaced by lines 12-52 |
| - [MA6 Specifications] |
| + max. Forces on Magnet: |
| + |horizontal |500N |
| + |vertical |500N |
| + |
| + !!Specifications |
| + |
| + !Energisation rates (Tesla/min) |
| + |
| + |Field range|Training mode (slow)|Normal mode (fast) |
| + |below 4.8 T|0.1922 |0.3844 |
| + |4.8 ... 6 T|0.0641 |0.3844 |
| + |
| + !Main Coils |
| + |
| + |Guaranteed maximum central magnetic field|6 Tesla |
| + |Current for full field |93.661 A |
| + |Homogeneity over 15 mm diameter sphere |1.0 % |
| + |Magnet clear bore diameter |50 mm |
| + |Nominal inductamce |18.13 Henry |
| + |Switch heater current for open state |65 mA |
| + |Current decay in persistent mode |< 1/10000 / h |
| + |Distance of magnetic field centre for base of cryostat| 165 mm |
| + |Neutron split |40 mm |
| + |Vertical neutron access on a 15 mm sphere|±15 deg |
| + |Horizontal neutron access |340 deg |
| + |
| + !Resistance values (Ohm) |
| + |
| + | |RT |77 K |4.2 K |
| + |Magnet coil |48.4 |39.4 |0.1 |
| + |Switch heater |114.7|112.5|104.5 |
| + |Spare switch heater |112.7|110.4|103.5 |
| + |Thermometer on coil (Allen Bradley)|317.5|385 |4560 |
| + |
| + !General |
| + |
| + |Liquid He evaoration rate (needle vale close, no current)|<275 cm3/h |
| + |Liquid N2 evaporation rate |300 cm3/h |
| + |Useful liquid He volume | 22 l |
| + |Liquid N2 volume | 25 l |
| + |Approximate weight | 150 kg |
LIN