This is version 21.
It is not the current version, and thus it cannot be edited.
[Back to current version]
[Restore this version]
Draft: Rules concerning Superconducting Magnets and Dilution Refrigerator Experiments
Experiments involving superconducting magnets and/or dilution refrigerators
are labor-intensive for the sample environment staff and imply a quite high
risk of problems, especially at the beginning of an experiment. In the evening
and on weekends, there is only very limited technical support. In order to
minimize beam time losses, some rules have to be established:
Experiments with superconducting magnets and/or dilution refrigerator experiments
- The experiments must start on a working day, early in the morning.
- Aligning the sample with neutrons must be done before the starting day.
Dilution refrigerator experiments
- Sample changes must be planned on working days
- Experiments should not start on Fridays or at a day before a holiday.
If a beam block begins at such a day, the mounting and cooldown of the
dilution refrigerator should be planned for the day before.
- The sample must be ready a workday before starting the experiment, except
for the case where the stick is already used immediately before.
- Sample changes take a full working day, i.e. the warming up of the old
sample must start early in the morning.
- The number of dilution refrigerator experiments is limited. Experiments
during internal beam time have to be approved by Joël Mesot (scientific
relevance for LNS) and by Markus Zolliker (availability).
This particular version was published on 23-Feb-2007 07:56:53 UTC by MarkusZolliker.
|