| SICS manual for the SANS I instrument | ||
|---|---|---|
| <<< Previous | Quick reference Guide | Next >>> |
motor for horizontal movement.
motor for vertical movement.
special SANS command for controlling both beam stop axes together.
moves beam stop out of detecion area.
moves beam stop back into position.
releases the beam stop motors.
changes beam stop size, without parameter it returns the beam stop type.
| 1 for beam stop size of 40 mm x 40 mm |
| 2 for beam stop size of 70 mm x 70 mm |
| 3 for beam stop size of 85 mm x 85 mm |
| 4 for beam stop size of 100 mm x 100 mm |
returns value of the beam stop type.
| <<< Previous | Home | Next >>> |
| Positioning the detector | Up | Sample table |