This is version 2.
It is not the current version, and thus it cannot be edited.
[Back to current version]
[Restore this version]
Procedure to Change from/to the Omega Motor on the Sample Stick
in /home/rita2/rita2_sics/rita2.tcl change the following line
set ma15motor 1 (1 for motor on sample stick, 0 for normal omega table)
and then restart sics with the command
monit restart sicsserver
on the unix prompt.
If the motor is not running, it may be necessary to load the motor
parameters with the el734_test program. Type
el734_test -help
for documentation. A parameter file can be found under /home/users/tascom/PSI/mot_4_01.par
Actually the serial cable for the omega motor is connected to channel 4 (port 3004) on the
terminal server lnsts02.psi.ch.
This particular version was published on 28-Sep-2006 08:57:50 UTC by MarkusZolliker.
|