| Lines 28-29 were replaced by lines 28-29 |
| - select the flow by hand (a good flow value is selected when the |
| - heater power at 10 K (stable) is about 0.15 W. |
| + select the flow by hand (a good flow value is selected when the |
| + heater power at 10 K (stable) is about 0.15 W. |
| Lines 31-32 were replaced by lines 31-32 |
| - value (to 10 or even 100 sec) and reduce the "minimal pulse" value |
| - to 0.05 sec. |
| + value (to 10 or even 100 sec) and reduce the "minimal pulse" value |
| + to 0.05 sec. |
| Lines 34-37 were replaced by lines 34-37 |
| - a reasonable needle valve motor position) when not changing |
| - the temperature over a long time. In fixed mode you can also |
| - move the motor directly from the needle valve controller by means |
| - of the arrow keys. |
| + a reasonable needle valve motor position) when not changing |
| + the temperature over a long time. In fixed mode you can also |
| + move the motor directly from the needle valve controller by means |
| + of the arrow keys. |
LIN