This is version 6.
It is not the current version, and thus it cannot be edited.
[Back to current version]
[Restore this version]
Configuration
- DM,DA
- Monochromator/Analyser d-spacing [Angstroem].
- SM,SS,SA
- Scattering sense at Mono (new: as text LEFT/RIGHT/STRAIGHT)
- FX
- new as text: KI or KF
- AS,BS,CS
- unit cell constants [Angstroem]
- AA,BB,CC
- unit cell constants [degrees]
- AX,AY,AZ
- Components of a recip. lattice vector in scattering plane of the sample. A3 is the angle between KI and (AX,AY,AZ).
- BX,BY,BZ
- Components of a second distinct recip. lattice vector in scattering plane.
informational only:
- ALF1,ALF2,ALF3,ALF4
- Horizontal collimation before mono, before sample, before analyser, before detector [minutes FwHm]
- BET1,BET2,BET3,BET4
- Vertical collimation before mono, before sample, before analyser, before detector [minutes FwHm]
- ETAM,EATS,ETAA
- Monochromator/Sample/Analyser mosaic [minutes FwHm]
Limits and Zeros
Lower and upper limits and zeros for all motors. L, U and Z are appended
as a prefix to the variable names to indicate Lower limit, Upper limit and Zero.
Motors
A1 Monochromator angle (Bragg angle in degrees)
A2 Scattering angle at mono. (twice Bragg angle in degrees)
A3 Sample angle (degs) (A3=0 when (AX,AY,AZ) is along KI)
A4 Scattering angle at sample [degrees]
A5 Analyzer angle (Bragg angle in deg.)
A6 Scattering angle at analyzer (twice A5 in deg.)
SINQ Instruments:
MCV Mono curvature vertical
SRS Sample table second ring
ACH Anal curvature horizontal
MTL Mono lower translation
MTU Mono upper translation
STL Sample lower translation
STU Sample upper translation
ATL Anal lower translation
ATU Anal upper translation
MGL Mono lower goniometer (Reserved)
MGU Mono upper goniometer
SGL Sample lower goniometer
SGU Sample upper goniometer
AGL Anal lower goniometer (Reserved)
AGU Anal upper goniometer
D1T D1B D1R D1L Diaphragm 1 (top/bottom/right/left)
D2T D2B D2R D2L Diaphragm 2 (top/bottom/right/left)
D3T D3B D3R D3L Diaphragm 3 (top/bottom/right/left)
Virtual motors
EI Incident neutron energy [meV]
KI Incident neutron wavevector [Angstroem-1]
EF Final neutron energy [meV]
KF Final neutron wavevector [Angstroem-1]
QH -\
QK +-- Components of Q in Reciprocal Lattice Units [R.L.U.]
QL -/
EN Energy transfer; +ve neutron energy loss [meV]
QM Length of Q [Angstroem-1]
Polarisation analysis
IF1V IF1V and IF2V are currents [Amps] in the vertical-field
IF2V coils for Flipper 1 and Flipper 2.
IF1H Horizontal-field currents are KI*IF1H for Flipper1 and
IF2H KF*IF2H for F2.
HELM Angle between axis of Helmholtz pair one and KI.
F1 -\ Status of flippers one and two; these variables take the
F2 -/ values ON or OFF.
Currents
I1 -\
I2 \
I3 +-- power supply current values [[Amps]
. /
I11 -/
Field
HX -\ Components of Helmholtz fields at sample in Oersteds.
HY +-- HX is parallel to Q and HY is perpendicular to Q in
HZ -/ the scattering plane.
Increments Variables
For all motors, virtual motors, currents and field
the identifier for the step used with a SCan command is obtained
by prefixing the variable name with the letter D.
This particular version was published on 05-Apr-2005 11:21:29 UTC by MarkusZolliker.
|