This is version 5.
It is not the current version, and thus it cannot be edited.
[Back to current version]
[Restore this version]
IPS
Oxford Instruments superconducting magnet power supply IPS
Create an IPS object:
makeobject mf ips <terminal server> <port>
The name might be choosen differently, mf is used by convention, and
is also used by the scripts called with the samenv command.
Subcommands and Parameters
Command and subcommand | | Description |
mf | r | magnetic field |
mf persmode | w | 0: do not work in persistent mode, 1: go to persistent mode after a drive |
mf perswitch | r | state of persistent mode switch |
mf maxlimit | r | maximal limit for field |
mf limit | w | soft limit for field (when set the first time after initialization, maxlimit is also set) |
mf ramp | w | ramp rate (the real ramp rate may be limited by the sweep limits defined in the IPS) |
mf current | r | the current in the leads (converted to Tesla) |
mf lastfield | r | value the the field before goings to persistent mode |
mf confirm | c | confirm the persistent field in case the stored value in the driver does not match the value stored in the IPS |
mf targetValue | r | target value |
r: read-only, w: writeable parameter, c: command
Plus standard commands and parameters defined by EaseBasePar, EaseSendPar, EaseMsgPar
This particular version was published on 19-Sep-2005 11:13:11 UTC by MarkusZolliker.
|