EaseIps

IPS

Oxford Instruments superconducting magnet power supply IPS

Create an IPS object: 

  makeobject mf ips <terminal server> <port>
The name might be choosen differently, mf is used by convention, and is also used by the scripts called with the samenv command.

Subcommands and Parameters

Command Syntax     Description

mf             (r) magnetic field

mf persmode    (w) 0: do not work in persistent mode
                   1: go to persistent mode after a drive

mf perswitch   (r) state of persistent mode switch

mf maxlimit    (r) maximal limit for field

mf limit       (w) soft limit for field (when set the first time
                   after initialization, maxlimit is also set)

mf ramp        (w) ramp rate (the real ramp rate may be limited
                   by the sweep limits defined in the IPS)

mf current     (r) the current in the leads (converted to Tesla)

mf lastfield   (r) value the the field before goings to persistent mode

mf confirm     (c) confirm the persistent field in case the stored
                   value in the driver does not match the value
                   stored in the IPS

mf targetValue (r) target value

               (r): read-only
               (w): writeable parameter
               (c): command

Plus standard commands and parameters defined by EaseBasePar, EaseSendPar, EaseMsgPar