At line 12 added 14 lines. |
+ {{{ |
+ Command Syntax Description |
+ |
+ mf (r) magnetic field |
+ |
+ mf persmode (w) 0: do not work in persistent mode |
+ 1: go to persistent mode after a drive |
+ |
+ mf perswitch (r) state of persistent mode switch |
+ |
+ mf maxlimit (r) maximal limit for field |
+ |
+ mf limit (w) soft limit for field (when set the first time |
+ after initialization, maxlimit is also set) |
Lines 14-24 were replaced by lines 28-29 |
- |Command and subcommand| |Description |
- |mf |r|magnetic field |
- |mf persmode |w|0: do not work in persistent mode, 1: go to persistent mode after a drive |
- |mf perswitch |r|state of persistent mode switch |
- |mf maxlimit |r|maximal limit for field |
- |mf limit |w|soft limit for field (when set the first time after initialization, maxlimit is also set) |
- |mf ramp |w|ramp rate (the real ramp rate may be limited by the sweep limits defined in the IPS) |
- |mf current |r|the current in the leads (converted to Tesla) |
- |mf lastfield |r|value the the field before goings to persistent mode |
- |mf confirm |c|confirm the persistent field in case the stored value in the driver does not match the value stored in the IPS |
- |mf targetValue|r|target value |
+ mf ramp (w) ramp rate (the real ramp rate may be limited |
+ by the sweep limits defined in the IPS) |
Lines 26-27 were replaced by lines 31-44 |
- r: read-only |
- w: writeable parameter |
+ mf current (r) the current in the leads (converted to Tesla) |
+ |
+ mf lastfield (r) value the the field before goings to persistent mode |
+ |
+ mf confirm (c) confirm the persistent field in case the stored |
+ value in the driver does not match the value |
+ stored in the IPS |
+ |
+ mf targetValue (r) target value |
+ |
+ (r): read-only |
+ (w): writeable parameter |
+ (c): command |
+ }}} |