|
This is version 13.
It is not the current version, and thus it cannot be edited.
[Back to current version]
[Restore this version]
Sample space dimensions
see Magnet List
Windows
Beam parallel to the field:
| full window height | 70 mm |
| angular opening on a 13 mm sample* | +/- 15 deg |
| angular opening on a 5 mm sample* | +/- 17 deg |
Beam perpendicular to the field:
| full window height | 20 mm |
| angular opening on a 11 mm sample* | +/- 7.1 deg |
| angular opening on a 5 mm sample* | +/- 8 deg |
(*) openings are identical vertical and horizontal,
as the cuts in the coils are cones.
| Max. sample diameter | 20 mm |
| Sample space diameter at magnet center | 22 mm |
| Distance from sample stick cap to magnet center | 1302 mm |
| Distance from sample stick cap to bottom of sample space | 1358 mm |
| Sample space diameter above coil | 62 mm |
| Distance from sample stick cap to end of 62 mm space | 1080 mm (+ 2 mm tolerance) |
| Motorized Rotator, distance to add | 159 mm |
| Motorized Rotator: from sample stick cap to magnet center | 1461 mm |
| Motorized Rotator: from sample stick cap to bottom of sample space | 1517 mm |
Magnetic Field Range
if no other Restrictions apply
| max Bfield (T) | lambdaflow |
| 9.9 | off |
| 11.0 | 15 mbar |
Ramp Rates
| slow / fast ramp rate [A/min] | up to [A] | slow / fast ramp rate [Tesla/min] | up to [Tesla] |
|---|
| 6.0 / 8.67 | 70 | 0.5886 / 0.8505 | 6.86 |
| 2.0 / 8.67 | 90 | 0.1962 / 0.8505 | 8.82 |
| 1.0 / 8.67 | 101.934 | 0.0981 / 0.8505 | 10 |
| 0.5 / 0.5 | 112.128 | 0.0491 / 0.0491 | 11 |
This particular version was published on 04-Jun-2012 08:23:06 UTC by MarkusZolliker.
| 
LIN