| Line 1 was replaced by lines 1-2 |
| - Angular dimensions of the windows: |
| + !Sample space dimensions |
| + see [Magnet List] |
| Lines 3-5 were replaced by lines 4-56 |
| - |sample\\size|parallel\\to the field|perpendicular\\to the field |
| - |5 mm | +/- 17 deg | +/- 8 deg |
| - |10 mm | +/- 16 deg | +/- 7.3 deg |
| + !Windows |
| + |
| + ''Beam parallel to the field:'' |
| + |
| + |full window height | 70 mm |
| + |angular opening on a 13 mm sample*| +/- 15 deg |
| + |angular opening on a 5 mm sample* | +/- 17 deg |
| + |
| + ''Beam perpendicular to the field:'' |
| + |
| + |full window height | 20 mm |
| + |angular opening on a 11 mm sample*| +/- 7.1 deg |
| + |angular opening on a 5 mm sample* | +/- 8 deg |
| + |
| + (*) openings are identical vertical and horizontal, |
| + as the cuts in the coils are cones. |
| + |
| + Material in the beam (radial, multiply by 2 for total transmission): |
| + |
| + * main vacuum: Sapphire windows 7 mm |
| + * screen: 1 mm Al or less |
| + * sample space: 1 mm Al unknown alloy |
| + |
| + !Dimensions |
| + |
| + |Max. sample diameter | 20 mm |
| + |Sample space diameter at magnet center| 22 mm |
| + |Distance from sample stick cap to magnet center| 1302 mm |
| + |Distance from sample stick cap to bottom of sample space | 1358 mm |
| + |Sample space diameter above coil| 62 mm |
| + |Distance from sample stick cap to end of 62 mm space| 1080 mm (+ 2 mm tolerance) |
| + |Motorized Rotator, distance to add | 159 mm |
| + |Motorized Rotator: from sample stick cap to magnet center| 1461 mm |
| + |Motorized Rotator: from sample stick cap to bottom of sample space | 1517 mm |
| + |
| + |
| + !Magnetic Field Range |
| + |
| + if no other [Restrictions|MA11Restrictions] apply |
| + |
| + |max Bfield (T) | lambdaflow |
| + | 9.9 | off |
| + | 11.0 | 15 mbar (with a 65 m3 pump) |
| + |
| + __Homogeneity__: 0.2 % over a 10 mm diameter spherical volume |
| + |
| + !Ramp Rates |
| + |
| + ||slow / fast ramp rate [[A/min]||up to [[A]||slow / fast ramp rate [[Tesla/min]||up to [[Tesla] |
| + |6.0 / 8.67 | 70 |0.5886 / 0.8505 | 6.86 |
| + |2.0 / 8.67 | 90 |0.1962 / 0.8505 | 8.82 |
| + |1.0 / 8.67 | 101.934 |0.0981 / 0.8505 | 10 |
| + |0.5 / 0.5 | 112.128 |0.0491 / 0.0491 | 11 |
LIN